Longo programmable controller LPC-2.IR2V
is "1":
When LPC-2.IR2V receives an IR command, value of
iIrCmdRecNum c
orresponds to
the number described below in binary code which includes toggle bit, address code
and data code of the RC-5 protocol. When button is released, value gets to 0 after
next communication cycle with main module or after approximately two seconds
regardless communication.
Raw to engineering data:
In case that
oIrProtocolSel
is set to 2 .. 6, variable
iIrCmdRecNum
is not applicable,
because protocols are transmit only.
6
