Longo programmable controller LPC-2.CR1
5.2 Mounting frame selection
Frame, suitable for CR1 module insertion, should be modular one at least 3 gang wide. Be careful to
have corresponding flush-mounting box provided on the place where module will be positioned.
Smarteh has verified following lines to be compatible with LPC-2.CR1 module:
●
Bticino – Living, Light
●
Gewiss – Playbus, System
●
Vimar – Plana, Idea
●
Tem – Modul Soft, Modul Line
●
Master
Frames of other vendors most probably suits as well, but they were not verified by Smarteh. Before
installation verify compatibility of non listed frames.
Module housing has a fin on each side, which can be easily removed with knife cutter or pliers. This
adaptation enables housing to be build in various frame formats with two different depths. With
regard to frame used you may remove fin for housing to fit in.
Figure 3: Removable fin.
7
