Longo Bluetooth Products LBT-1.B01
Figure 8: Installation flowchart
1. Check if sensor will be fixed with double sided glue tape or with screws (can also be fixed
both).
2. Once sensor is mounted to provided place, insert two AA batteries and firmly close the
cover. In addition, also cover can be fixed with a screw and hidden by small plastic cap,
delivered together.
3. Mount the magnet in a way to get best sensing performance.
4. After few seconds Green or Red LED starts to blink, please see flowchart above for details.
5. If sensor is not provisioned (Red LED will blink 3x), the provisioning procedure have to be
started (contact producer for more details*).
6. Once provisioning is finished, sensor will continue with normal mode of operation and this
will be indicated as Green LED blinking once per 10 sec.
*
Note:
Smarteh Bluetooth Mesh products are added and connected to a Bluetooth Mesh network by
using standard provisioning and configuration mobile apps tool such as nRF Mesh or similar.
For further information, please contact producer for more details.
12
