Longo Bluetooth Products LBT-1.B01
5.INSTALLATION
Table 5: LEDs & Inputs
LED1
Red LED
1x blink – empty battery
2x blinks – network/friend lost
3x blinks – unprovisioned node
LED2
Green LED
1x blink – normal operation. It's also feedback for S1 (reed
contact) when activated with magnet
S1
Reed contact
Mode setting contact
Inside 5 sec time window, perform corresponding number of
swipes in duration of not less than 200 ms with permanent
magnet close to the window sensor S1 reed contact position.
Following window sensor action or mode will be set:
number of swipes Action
=====================================
5x Factory reset
S2
Switch
Vandal switch: close = not active, open = active
S3
Reed contact
For window/door magnet
Figure 4: LBT-1.B01 LEDs and switches position
9
