Comfort.me DUO
OPENTHERM
18
Wi-Fi installation:
1.
Carefully separate the thermostat from the back cover. To do this it is necessary to pry into the gap between the two
parts with a small flat-blade screwdriver.
2.
Fix the front part, just removed from the cover, on the support specially designed for positioning the device on a
surface.
Control unit installation:
3. Using a small screwdriver, loosen the screws located at the base of the controller. Carefully separate the front panel
from the rear panel.
4. Secure the back cover to the wall, using the screws provided.
3.
Connect the cables to the control unit as shown in the wiring diagram.
4.
Replace the front panel on the rear panel and fix it with the screws removed earlier.
5.
Press the power button and check that the LED lights up.