SmartDHOME Comfort.me DUO, Manual, Page: 14 / 20

Comfort.me DUO
OPENTHERM
14
Contol unit LED operation table
LED1
ABSENT Heating not running
FLASHING Communication error with the boiler
STEADY ON Heating in operation
LED2
ABSENT Control unit no powered
FLASHING WiFi not configured, no WiFi
STEADY ON WiFi configured
How to use
The Comfort.me DUO thermostat can be used in three modes: automatic mode, manual mode and eco mode
(holiday/absent).
To switch from one mode to another, you can use the application or press M on the thermostat.
Automatic mode (PRG)
(recommended choice) After pairing the thermostat and control unit and connecting the system to the Wi-Fi, program
everything via the Application.
(alternative choice without using the application) Press and hold the P button for 3 seconds to access the
programming settings.
Set the time bands and the relative temperatures by pressing the and buttons , each press on P will allow
you to pass to the next time band.
Default setting:
Periodo 1 2 3 4 5 6
Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp
12345
(Mon-Wed)
7am 22
℃
8:30am 19
℃
17pm 22
℃
18pm 19
℃
20pm 22
℃
22pm 19
℃
6(Sat)
8am 22
℃
8:30am 22
℃
17pm 22
℃
18pm 19
℃
20pm 22
℃
22pm 19
℃
7(Sun)
8am 22 ℃ 8:30am 22 ℃ 17pm 22 ℃ 18pm 19 ℃ 20pm 22 ℃ 22 pm 19 ℃
Window Opening Detection
The window opening detection can only be activated via the thermostat (therefore not from the app) using the
instructions in the Parameter Setting section.
When the window opening detection function is active, the system automatically stops heating when a sudden drop in
room temperature is detected (2 ° C in 15 minutes).