Controlling with IR
Switching Ports with Remote Control
You have the option of controlling the matrix via Remote Control. The PLAZOOM remote is used to
control the matrix. The SM-EYE must be connected to the SuperMatrix ( this is an optional connector
not always available in all boxes) in order to interface the remote control with the matrix. The way
the remote control the matrix is as follows:
Xx<enter>yy<enter>
When XX is the output , YY is the input
To change the routing of the signals,
For example, to set output 3 to input 2 press “0” + “3” + ENTER, then press “0” + “2” + ENTER. If a
wrong button is pressed, the user must either press the ESC button or wait 5 seconds before restart-
ing the sequence.
Chapter 3: Software Installation & Operation
Summary of Contents for SuperMatrix
Page 15: ......
