English 42
Appendices
Appendices
Image Problems
No image appears on-screen
Ensure that all the cables and power connections are correctly and
securely connected as described in the “Installation” section on
Ensure that all of the pins on the connectors are not bent or broken.
Make sure if the projection lamp has been securely installed.
Make sure the projector is turned on.
Ensure that the
Hide Display
feature on the remote is disabled.
Partial, scrolling or incorrectly displayed image
If you are using a desktop computer:
For computers running the Windows
®
95, Windows
®
98,
Windows
®
2000, or Windows
®
XP operating system:
. Click
My Computer → Control Panel
, and then double-click
Display
.
2. Select the
Settings
tab.
3. Verify that your display resolution setting is lower than or equal
to UXGA (600 × 200).
If the projector is still not projecting the whole image, you will also
need to change the monitor display you are using. Refer to the
following steps.
4. Click
Advanced Properties
.
Troubleshooting
If you experience a problem with your projector,
please refer to the following information. If a
problem persists, please contact your local
reseller or service center.
Summary of Contents for UF55
Page 57: ......
