Sympodium IM–150 Installation Guide
19
3
Reach inside the X-Port 30 unit to disconnect cable C09 from the J8 port inside the X-Port
30 unit. You no longer need cable C09, so you can discard it.
Remove cable C09
Connect cable C10
J8 Connector Port
4
Insert the other modular cable, labeled C10, into the J8 port. This cable, which is already
inside the X-Port 30 unit, makes the port on the connection panel active. The cable has a
black label on it in addition to the white C10 label.
NOTE:
The other end of this cable (C10) is already connected to the connection panel
port on the X-Port 30 unit.
5
Attach the control panel cover plate to the front plate using the hex key and the screws
you removed in step 1.
Screws
Control Panel Cover Plate