background image

2

Glossary of terms used in this manual.

TELCO

Telephone company line that comes to your building.

KSU/PBX

Key Service Unit. A telephone system that has multiple lines. May be mechanical
buttons or electronic. PBX means Private Branch Exchange.

117 VAC

117 volts AC current. The wall power pack furnished in North America is a 12 VDC 500 mA
supply. If this product is used in countries that have an AC line voltage of 220-240 volts AC then
a suitable power pack must be furnished by the customer.

Modular cable

Standard connection to telephone wall sockets and phones. Known as RJ-11 plugs.

Central Office

Origination of telephone service at the phone company.

LED

Light Emitting Diodes. Solid state lamps.

REN

Ringer Equivalency Number. This number represents the load on the phone line. Telephone
instruments and accessory products have this number on the product.

HOOK FLASH

If you have CALL WAITING or other features supplied by the phone company as part of
your service, pushing the button on the cradle of the phone may cause a problem with
the MovieTimeS. We recommend you suspend these services by calling the phone
company and having the additional services removed.

#  The “pound” button on the touch-tone phone allows you to enter the programming portion of
the program.

* The “asterisk” button on the phone is also part of the programming sequence when receiving,
deleting, or recording new messages.

Summary of Contents for MT4-16 MovieTimeS


















Reviews: