11
*6 0 3 2 # Review Movie List Message
*6 0 3 3 # Review Info. Message #1
*6 0 3 4 # Review Info. Message #2
*6 0 3 5 # Review Info. Message #3
MESSAGE DELETE
A current message must be deleted before recording a new message. This will remove any
remnants of the old message, if the new one is shorter.
Each Message Delete command allows the user to delete any one of the messages. While the
message is being deleted the user will hear the system busy signal for a period of time followed
by the success beep, returning to command mode ready to enter the next command.
Syntax:
*7 0 0 1# through *7024#
I
Delete Screen Messages #1 - #24
*7 02 4#
*7 03 1# Delete Greeting Message
*7 03 2# Delete Movie List Message
*7 03 3# Delete Info. Message #1
*7 03 4# Delete Info. Message #2
*7 03 5 # Delete Info. Message #3
SET RING
Set Rings command sets the number of rings that the unit answers on. Valid numbers of rings
range from 01 to 15. If a valid number of rings is entered the user hears the success beep and
returns to command mode ready to enter the next command. If the entered number of rings is
not valid the user hears the error tone and returns to command mode ready to enter the next
command.
Syntax... ( X =any value 01 - 15)
* 1 1 # X X # Set Ring to answer on XX rings
SET NUMBER OF REPEATS
The Set Number of Repeats command sets the number of times the Greeting message repeats.
Valid numbers of repeats range from 00 to 15. If a user enters a valid number they hear the
success beep and return to command mode ready to enter the next command. If the entered
number is not valid the user hears the error tone and returns command mode ready to enter the
next command.
Syntax... ( X X =any value 00 - 15)
* 1 6 # X X # Set Repeats
