10
LIGHTS & INDICATORS
The MovieTimeS front panel has a multicolored Mode LED and a green Line LED for each available line.
MODE LED
The Mode LED normally flashes green to indicate normal operation. The Mode LED also flashes amber as the
MovieTimeS processes commands.
In the event of a system failure, the mode LED flashes red.
LINE LEDs
The Line LEDs will show green whenever the MovieTimeS is in control of the line in command mode.
The FACTORY jack on the back of the MovieTimeS must not be used by customer. This jack
is used by the factory to load instructions to the internal computer. If program upgrades are
available in the future, your machine may be upgraded to the new software by returning it to
the factory to load the new operating program.
Note: You must delete a message before recording a new message. This is necessary because your new
message may be shorter than the old one and the last part of the old message will remain. Deleting the
message restores a blank memory box, ready for the new message.
Maximizing the capability of the MovieTimeS.
This digital answering device has 24 message boxes for show times on 24 screens. If you have a 30 screen
complex, often a movie is played in interlock on multiple screens. We suggest you mention the movie once and
use a show times box to give the show times for all showings.
If you have more than 24 movies you may use one show times box for two different movies if they run the at
same times.