10 |
CHAPTER 2
– INSTALLING YOUR HUB
Connecting Your Hub
After mounting your hub, connect it to your SMART product and peripheral devices.
To connect your hub
1. Connect your hub to your SMART product’s projector through a DVI-out port using
a DVI to VGA cable, or the provided DVI cable.
NOTES
–
Use a USB cable to connect your hub to another SMART product. If your
SMART product has a serial connector rather than a USB connector, use
the USB to serial adapter provided with your hub.
–
Your hub includes two video cables. Use these cables to connect your
hub to your projector or display.
–
SMART recommends using a DVI cable, when possible, for optimal
performance.
–
You can connect multiple SMART products to a single SMART Hub
VE220. All SMART products connected to the unit share a common
display. For more information, contact the
SMART Support site
.
2. Connect your hub to your network.
3. Connect your hub to your peripheral devices with USB connectors.
4. Connect your hub to its power supply, and then turn on your SMART product and
its projector or display.
Your SMART product enters
Whiteboard
mode.
