background image

 

 

and it will keep activating vibration alarms while the vehicle is moving.   
To disable vibration alarm and theft proof function, please connect the ACC line 
directly to the positive power supply and maintain a high level. 
5.2.2 Tele-cutoff (petrol/ electricity) control line (yellow) is connected to pin 86 of the 
Tele-cutoff (petrol/ electricity) relay (equal to the yellow line of the relay socket). 
 

5.3 Relay 

The standard accessory of relay is 12v which is only for vehicles with 12v battery. 
24v relay is the optional accessory. 
 

6.

 

Parameter Settings 

Both capital letter and small letter are acceptable for the command format of the 
following parameters. All the commands sent will be replied. If succeeded, it will 
reply “OK”. Otherwise, it has to be set again. 
To send the query command, the terminal will reply the corresponding content. 
By default, any mobile can send message to set the command to the terminal. 

6.1 Settings of APN 

Please  send  SMS  command  to  the  number  of  device  so  as  to  set  up  the  APN 
parameter. The device will  reply  “OK” automatically  after setting successfully. The 
SMS command is as follows: 

APN,APN name# 

E.g: APN,internet# 

Note:  The  APN  of  some  countries  have  user  name  and  password,  you  may  need  to 
send SMS command as following: 

APN,APN name,user name,password# 

E.g: APN,internet,CLIENTE,AMENA# 

 

6.2 Set SOS Numbers

 

SOS, A, No.1, No.2, No.3# 

  “A” means to add new numbers 
e.g. SOS,A,13510905991,13510905992,13527852360# 
 
To set single SOS number, 
SOS,A,13510905991# means to set the first number 

Summary of Contents for GT07












Reviews: