2.
Send
SENSOR,0#
to the terminal, you can turn off the vibration alarm.
3.
Send
ALM,OFF#
to disable SMS alarm function.
Send
ALM,ON#
to activate SMS alarm function.
7.3 Cut-off Petrol/Electricity
In case the vehicle is stolen, the users can send command from the platform to cut off
the Petrol/Electricity to stop the vehicle from moving.
Platform account and password must be entered for Petrol/Electricity cut-off, the
messages replied by terminal can be checked in the log.
Note: to ensure the safety of the driver and the vehicle, this command can only be
used when GPS is located and driving speed is less than 20km/h or the vehicle is not
moving.
7.4 Restore Petrol/Electricity
The users can send command from the platform to restore the Petrol/Electricity so that
the vehicle can keep moving.
Platform account and password must be entered for restoring Petrol/Electricity, the
messages replied by terminal can be checked in the log.
8. Log in GPS Platform
Please contact your dealer for details.
9. Trouble Shooting
9.1 After installing for the first time, the device can’t get connected with platform
server. it keeps showing “Log Off” status in platform.
①
Check the connection of power-line, please do not connect it with the vehicle
control line.
②
Check SIM card installation.
③
Check ACC ignition cable connection, please turn on the ACC.
④
Check LEDs’ status. Please refer to Chapter 3.
⑤
Check whether GPS is located, if not, please test it in the open area.
9.2 If it shows “Offline” status in platform,
First, check the status of LEDs, or check the state of SIM card. The steps are as
follows,
①
Check whether there is GSM signal.
②
Check whether all devices are Offline or just single ones, to make sure
whether it is the problem of operator network.
