These commands control the current system settings. These commands are available when the
projector is in Standby mode and when it is on.
Command
Command target range
Response
set restoredefaults
[none]
restoredefaults=done
set lamphrs [target]
=0
lamphrs=0
set vgaoutnetenable [target]
=on
=off
vgaoutnetenable=[target]
N
N O T E
The
Network and VGA Out
setting’s features are off by default. Select
on
to activate these
features.
A P P E N D I X
B
Remotely managing your system through an RS-232 serial interface
84
