SMART Board 600i4, User Manual

Page: 28 / 108

Setting Use Notes
Set to Default? Resets projector settings to their
default values. If you select Yes , all projector settings
reset to their defaults, reversing any
menu changes you made. This action
is irreversible.
Don’t adjust this setting unless you
want to reset all of the applied settings,
or unless you’re advised to by a
SMART Support specialist.
Network menu
Network and VGA
Out Activates the projector’s VGA Out and
RJ45 connector and network features.
Status Displays the current network status
(
Connected , Disconnected or Off ).
The default is off.
DHCP Displays the status of the network’s
Dynamic Host Configuration Protocol
(DHCP) as
On or Off .
The default is on.
On enables a DHCP server on the
network to automatically assign an IP
address to the projector.
Off enables an administrator to assign
an IP address manually.
Password
Reminder E-mails the network password to the
predefined e-mail recipient. See Web page management on page
63 to set up a destination e-mail
address.
IP Address Displays the projector’s current IP
address in values between 0.0.0.0 and
255.255.255.255. To change the projector’s IP address,
use the RS-232 connector (see
Network controls on page 79) or use a
DHCP server to assign a dynamic IP
address, and then set a static IP
address using the network remote
management feature (see
Remotely
managing your system through a
network interface
on page 63).
Subnet Mask Displays the projector’s subnet mask
number in values between 0.0.0.0 and
255.255.255.255.
Gateway Displays the projector’s default
network gateway in values between
0.0.0.0 and 255.255.255.255.
DNS Displays the projector’s primary
domain name number in values
between 0.0.0.0 and 255.255.255.255.
MAC Address Displays the projector’s MAC address
in xx-xx-xx-xx-xx-xx format.
C H A P T E R 3
Using your interactive whiteboard system
18