7
Functions of the 433-CMU Economy Central Monitor
Test system by activating each component. For example,
press a Nurse Call Button or wave a hand in front of a Motion
Sensor that has been programmed into the Central Monitor.
Pager (optional) and Central Monitor should both alarm.
The Central Monitor and optional Pager with Display
(433-PGD) should show correct identification number
of each device as it is tested. The optional Pager will only
alarm if within 300 feet from a Central Monitor. Any
433-PG or 433-PGD Pager will respond to any 30-CMU
or 433-CMU Central Monitor within 300 feet. The Central
Monitor and Pager should continue to alarm until they
are silenced.
To silence the Central Monitor, press either the “Call
Review” button or the “Reset” button. When the
Central Monitor is silenced, any Pager responding
to that Central Monitor will also be silenced. For a
better understanding of “Call Review” and “Reset”
features, refer to pages 7 and 8 of these instructions.
ON OFF
VOL
LANGUAGE
REVIEW
Pager
VOL
LANGUAGE
REVIEW
up to 300 feet
IMPORTANT: The end user is responsible for testing system at its furthest range of use.
1) Call Review Button
2) Volume Button
3) Language Button
4) Replace/Add Button
5) Record/Add Button
6) Programming Light
7) Reset Button
8) Antenna
9) Hook
10) Battery Compartment
11) Base
12) Call/Alarm Switch
13) External Speaker Outlet
14) Lock/Unlock Switch
15) DC Input
9
10
11
12
13
14
15
433-PG
433-PG
433-NC
433-MS
433-CMU Front
433-CMU Back
433-CMU Left Side
To silence the pager, switch the ON/
OFF switch on the side to “OFF.”
WIRELESS CALL SYSTEM
CALL REVIEW
VOLUME
LANGUAGE
REPLACE/ADD
RECORD/ADD
RESET
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
433-CMU
WIRELESS CALL SYSTEM
CALL REVIEW
VOLUME
LANGUAGE
REPLACE/ADD
RECORD/ADD
RESET
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
433-CMU
3
Test the system - Central Monitor and Optional Pager
+
_
A23-12V
1
1
2
3
4
5
6
7
8
Call Review
Reset