EN INSTRUCTION MANUAL
Important Information!
Thank you for purchasing the four-stage Smart Battery Charger.
Please read this instruction manual carefully before operating the
device. Keep this manual in a safe place for future reference. This
instruction manual is part of the product. It must be handed over
along with the device if it is passed on to a third party.
Introduction
The smart battery chargers BC series are equipped with a 4-step
booster and constant-current charge. Unlike with conventional
chargers with IV characteristic, this gives a much faster, efficiency
and more precise charging of up to 100% of the battery capacity.
Thanks to the first step (time controlled charge). This helps activate
the battery status and wake up a weak or flat battery to a suitable
recharging level. This improves the battery life and in turn helps to
save the environment. The batteries are protected for overcharged.
The smart battery charger has a selector switch which allows you to
set the charger for charging sealed “AGM“ / starter / wet batteries,
sealed lead acid “GEL“ batteries, or for the charging of Calcium
batteries. The smart charger can also be used as a power supply to
provide power to DC loads when a battery is not available. For safety
reasons, the input and output of the charger are completely isolated.
Warning!
Risk of electric shock! Do not open the device if it has been
connected to the AC power source.
This device has been CE tested and conforms to the applicable
directives and standards.
2