Setting a Soft button long response
You can designate a response for when a user presses the
Soft
button on a microphone for longer
than four seconds. Typically you can use this to mute auxiliary audio inputs but it can also trigger a
relay or have no action.
g
To set a Soft button long response
If you want to mute auxiliary audio inputs at the control unit, select
Aux Mute
in the
Soft Button
- Long
drop-down list on the
Microphones
tab.
If you want to trigger a relay in the relay input, select
Relay
.
If you don’t want a response when you press the
Soft
button for longer than four seconds,
select
No Action
.
Changing the audio input names and trims
The
Input Names/Trims
tab enables you to do the following:
l
Change the name of any audio input at the control unit so that it’s more recognizable in
SMART Audio configuration software. Each input can be named from one of the preset input
labels or can be user defined.
l
Trim the audio inputs that arrive at the control unit to reduce their volume.
g
To change the name of an auxiliary audio input device
1. Identify the input you want to rename on the
Input Names/Trims
tab.
2. Select the name you want for that input from the drop-down list. You can also select
User
Defined
, and then type a name for the input device.
g
To change the trim of an auxiliary audio input device
Select the input you want to trim on the
Input Names/Trims
tab, and then set the trim.
Other system settings
The
System Settings
tab enables you to do the following:
l
Change the volume of the active input device at the microphone.
l
Set a response for the room module relay.
l
Set a trigger for the room module relay.
C H A P T E R 5
Customizing your settings
42
Summary of Contents for SMART Audio 340
