Smart Technologies Board SBD600 Series, Configuration And User'S Manual

Page: 40 / 86

28 | CHAPTER 3 – CONNECTING YOUR SMART BOARD 600I3 OR SBD600I3
INTERACTIVE WHITEBOARD SYSTEM
Connecting Peripheral Visual or
Audio-Visual Devices
To connect a DVD player, VCR, document camera, digital camera or other peripheral
visual or audio-visual device to your SMART Board interactive whiteboard system,
you must connect the device’s video and audio outputs to the ECP. You can connect
up to three peripheral devices and a host computer at the same time.
IMPORTANT
If you have peripheral devices that do not use a 4-pin mini-DIN connector or an
RCA composite video jack, or if your device has an audio connection that does
not use RCA jacks, you may need to purchase third-party adapters.
To connect S-video,
composite and other
audio-visual inputs
1. Turn off your SMART Board interactive whiteboard system.
2. Connect the device’s video cables to the ECP using the appropriate inputs.
– Input 2 is the VGA connector.
– Input 3 is the S-video 4-pin mini-DIN connector.
– Input 4 is the composite video input.
3. For each peripheral device, connect the device’s audio cables to the associated
red and white RCA jacks adjacent to the appropriate video input.