Smart Technologies Board SBD600 Series, Configuration And User'S Manual

Page: 4 / 86

ii | INTRODUCTION – IMPORTANT INFORMATION
Safety Warnings, Cautions and Important
Information
WARNINGS – GENERAL
• Failure to follow the installation instructions included with your interactive
whiteboard, or found in this guide, could result in personal injury or product
damage.
• Two people are required to safely mount the projector boom and the
interactive whiteboard on a wall because the items might be too heavy for one
person to maneuver onto their wall-mounting brackets.
• Do not leave cables on the floor where they can be a tripping hazard. If you
must run a cable over the floor, lay it in a flat, straight line and secure it to the
floor with tape or a cable management strip of a contrasting color. Handle
cables carefully and avoid excessive bending.
• To reduce the risk of fire or electric shock, do not expose any component
of your SMART Board interactive whiteboard system to rain or moisture.
• When mounting the projector boom on a framed wall, you must attach both
the mounting bracket and safety tether to a stud to safely support the
projector’s weight. If you use only drywall anchors, the drywall can fail,
resulting in product damage and possible personal injury.
• If you remove the bolt supporting the limit strap, the projector’s boom will be
free to swing. Make sure that the bolt is tightened, and never remove it from
the unit without supporting the projector boom first.
• Do not climb (or allow children to climb) on any part of your
wall-mounted SMART Board interactive whiteboard system.
Climbing on your interactive whiteboard or the
UF55/UF55w projector’s boom could result in personal
injury or product damage. Do not climb on, hang from or
suspend objects from the projector’s boom.
• Cleaning a boom-mounted projector may result in a fall or injury.