Smart system SmartCam Zen, Quick Reference Manual

Page: 24 / 29

8.2.1 Axis Selection
SmartCAM Zen allows you to view the aviation standard angles of rotation defined as:
•
ROLL
•
TILT
•
PAN
and combinations of them.
In addition to these, it is also possible to view the lateral acceleration to which SmartCAM
Zen is subjected:
•
Side To Side (STS)
The following table allows a quick and exhaustive list of possible combinations.
The possible options depend on the operating mode in which SmartCAM Zen operates
(see 8.4.2)
STANDARD MODE
MENU ITEM UPPER LED BAR LOWER LED BAR
ROLL ROLL
TILT TILT
PAN PAN
ROLL & TILT ROLL TILT
ROLL & PAN ROLL PAN
TILT & PAN TILT PAN
ROLL & STS ROLL STS
DYNAMIC MODE
MENU ITEM UPPER LED BAR LOWER LED BAR
ROLL ROLL
TILT TILT
ROLL & TILT ROLL TILT
ROLL & STS ROLL STS
Obviously the display will show, in STANDARD MODE, the numerical values detected by
the SmartCAM ZEN sensors based on what the user has chosen.
8.2.2 Ranges
This menu allows you to specifically set the maximum ranges that can be displayed via
LEDs. The menu options are dynamic and related to the axis you have chosen to display
on the LED bar.
For all ROLL, TILT, PAN axis a choice is provided depending on the characteristics of the
axis and above all on the operating mode.
24