8.3.3
LED Deadband
It allows you to define an arbitrary space between the central LED and the first useful LED
on the right and left for viewing the inclination of the axis.
It is very useful for having immediate visual feedback when the displayed axis is at zero.
8.3.4
Brightness
It is possible to vary the brightness of the two LED bars in order to optimize the light
intensity according to the working environment.
Thanks to the brightness sensor integrated in SmartCAM Zen, it is possible not only to
define a fixed brightness but, above all, to define a minimum and maximum brightness
range.
This possibility is available only by setting the automatic mode which allows an
autonomous adjustment of the brightness of the LEDs (between the minimum and
maximum values chosen) based on the external environment.
8.4 System
In this menu it is possible to select some system parameters of SmartCAM Zen.
8.4.1
Options
8.4.1.1
Auto Power On
As reported in chapter 6, the operational state of the ZEN immediately after supplying
power is SLEEP MODE.
On the other hand, it is possible to set an override of this mode and allow to automatically
enter STANDARD MODE at power on.
26
Summary of Contents for SmartCam Zen
Page 1: ...1 v 1 3 ...
