Maintenance
Device Smart 2 lite does not require any maintenance. Check the transducers periodically. They work
properly if you hear a quiet clicking.
In the event that the transducer loses contact with the hull, turn the power off at the main switch and
repeat bonding. Use epoxy glue.
If the device is not working, open the generator housing and check the electrical fuses. Check the power
supply from the battery and reset the device using the main switch.
If you do not manage to resolve the problem, do not hesitate to contact us on the following e-mail
address:
[email protected] • [email protected] • www.smart-antifouling.com
The warranty period of the device is 5 years upon presenting the copy of the receipt.
Warnings
When voltage drops bellow 11V (12V DC system) or 22V (24V DC system) Smart 2 lite switches to
minimum settings. Battery indicator single blink, transducer indicators on.
When voltage drops bellow 10,5V (12V DC system) or 21V (24V DC system) Smart 2 lite switches OFF.
Battery indicator double blink, transducer indicators off.
When battery is charged Smart 2 lite switches back to normal (as set).
transducer indicators
battery indicator
