10
www.
smartscoop.com
11
www.
smartscoop.com
Mode Indicator Light
The MODE indicator light shows the status of
SmartScoop
®
Self-Scooping Litter Box:
Green, solid:
Unit is powered on and monitoring
for cat activity.
Green, blinking:
Unit has detected a cat and is wait-
ing 15 minutes to begin cleaning cycle.
Red, solid:
Unit has encountered excessive re-
sistance. Turn off the unit, unlock the clutch, remove obstruction, slide
waste unit back into “ready” position, lock clutch and turn it back on.
Red, blinking:
Last cleaning cycle failed to complete. Unit has detected
a cat and is waiting 15 minutes to begin cleaning cycle.
Using No-Touch Waste Bags
and Activated Carbon Filters
To install SmartScoop No-Touch Waste Bags, simply slide bag over
waste tray and push it down so bag hugs walls and creates a place for
waste to accumulate. Tuck bag excess under waste tray handle. Lightly
push tray into waste unit so it fits snugly.
To remove No-Touch Waste Bags when they are full, simply peel back
the bag over the waste tray and tie it closed. Disposing of litter is easy,
clean and you never have to come in contact with clumps and waste.
To install Activated Carbon Filter, simply place filter
in square located on waste tray lid and press filter
onto pin. We recommend replacing the activated
carbon filter every time you replace the waste bag
to keep odors to a minimum.
Before powering on SmartScoop, make sure the following are in order:
• Clutch is in the “locked” position
• Waste unit is securely fastened to the motor unit (you’ll hear a “CLICK”)
• Rake is properly installed and rake safety door is closed
• Power cord is properly fastened to underside of pan and the unit is
plugged in
Do not manually force motor unit while moving or stationary; this may
damage gears or motor.
To begin operation
, press the POWER button. SmartScoop is in
automatic mode. The MODE light will be solid green, indicating power is
on. SmartScoop will be at rest until a cat is detected. Upon detecting a
cat leaving, SmartScoop will begin a 15-minute countdown before begin-
ning a cleaning cycle. This countdown will be indicated by the MODE
LED blinking green. To avoid injury and ensure proper waste removal,
any further cat activity in the box will reset this countdown.
If the MODE LED is red, something may be disturbing the path of
travel. If this is the case, turn off the unit, unlock the clutch, remove
obstruction, slide waste unit back into “ready” position, lock clutch and
turn it back on.
Using SmartScoop
®
Introducing Your Cat to SmartScoop
®
Here are some tips:
