-8-
Tight Side Room Option
In situations where sideroom is very restricted and
installing the opener in one piece is difficult, the control
box module can be separated from the drive motor by
unscrewing the thumb screws (Fig. 8).
If refitting the control box module after installation is still
difficult you can mount the controller on the wall with
optional wall mount bracket and extension cable (Fig. 9).
When using the wall mount bracket fix the control panel
with thumb screws and connect the extension cable
between the controller module and the drive motor.
Risk Of Entrapment Label
1
The warning risk of entrapment label must be attached
to the door in a suitable, prominent location so as to
inform all users of the dangers involved in owning and
operating an automated garage door. We provide this
label for everyone’s safety and it only takes seconds to
install. So as a responsible garage door installer please
make sure this is completed before leaving the job.
THE FITTING OF THIS LABEL IS MANDATORY.
2
Once set up is complete and the obstruction margin
test is carried out (see page 14), please ensure that
this warning and all safety warnings described in the
owners manual are explained to the user to ensure
that they are clearly understood and followed.
Powering Up
1
Inspect the power cable for damage. Ensure that the
cable will not interfere with the moving door or the
opener.
2
Connect to power. The opener will perform a firmware
check and display the welcome screen with firmware
version for 2 secs as per Fig. 10 followed by the
firmware release date for 2 secs as per Fig. 11.
The first time the unit is powered up and no limits
have been set the unit will display
Positions
Not Set
(Fig. 12).
Menu Navigation
MENU Button Enter parameter settings mode and
change parameter settings.
MODE Button Save settings and exit set up mode and
return to normal operation.
SET Button
Save setting and move to next menu
item.
CODE Button Learn transmitter code.
Fig. 12
xx/yy/zz
Smart Roller
Nano vX.XX
Positions
Not Set
Fig. 8
THUMB SCREWS
Fig. 9
WALL BRACKET
(OPTIONAL)
THUMB SCREWS
EXTENSION CABLE
(OPTIONAL)
Fig. 11
Fig. 10
© February 2009 Smart Openers Pty Ltd
