9
Installation
In-use
Touch Screen*
INSTRUCTIONS
Language
Select a language. At any
time, touch the “X” (upper
right corner) to close the
installation assistant.
Details
This screen displays the
current and active / reactive
power values measured for
each phase.
Communication
Select desired
communication mode
(Sigfox for load curve
only or LAN/3G via Smart
Router).
System
This screen displays the
state of the Smart X and of
its peripherals.
Starting Smart X
While the meter is starting,
touch the screen to reset
factory default settings
Consumption
This screen displays
instantaneous power and
consumption for the month
in progress.
Verification
During this step, Smart X checks the quality of the connection to the Smart Impulse server and the
apparent compliance of the installation. In the event of non-compliance, actions are proposed.
If a multi-sensor kit is detected, specific actions are proposed.
*depending on version
The Smart X screen switches off (screensaver mode) automatically. Simply touch the screen to activate.