●
Read these instructions carefully before installing Smart X.
●
The safety of the facilities and buildings where Smart X is installed remains
the responsibility of the assemblers of those systems.
●
Smart X must only be handled when wearing personal protective equipment
that is appropriate to protect against (including but without limitation)
electric shocks and falling objects.
●
Any installation of Smart X hardware and/or accessories that does not
comply with the specifications of this Installation Manual, or with local
regulations regarding electrical installations, will cancel its warranty and may
compromise the safety of the hardware itself, and other equipment and
individuals in proximity.
●
For your safety, use only the accessories provided with Smart X or certified
by Smart Impulse, including all sensors and fuses.
●
Smart X can be installed on facilities of Installation Category IV,
corresponding to the origin of a building’s electricity supply and its proximity,
for voltage not exceeding 300 VAC compared to the earth (in accordance
with standard EN 60664-1).
INTRODUCTION
WARNING
Smart X
®
is a device that analyses and identifies the power consumption of each type of
equipment in a building, from only one measuring point.
In addition to standard information about the quality of energy, Smart X also provides a
percentage breakdown of electricity consumption by type of equipment or by end-use.
Data measured is retrieved from Smart Impulse servers in real time via an Internet connection,
or at the end of the measurement period when returning equipment to Smart Impulse.
Class II: device fully protected by
reinforced insulation.
2
Symbols used
Warning: instructions must be
consulted each time this symbol
appears.
Warning: potential electric
shock