Menu Settings
24
smartmeter T20
10.1.2
Audio1 / Audio2
Press
◄/►
to adjust the languages of the default audio channel and
the second audio channel.
10.1.3
Signal Audio Tone
Press
◄/►
to select/unselect an audible signal indicating that a station
is found during station search.
10.1.4
Changing Channel Option
Press
◄/►
to set the behavior during channel change. Select
Blank
, if
you want a short dark period or select
Freeze
if the screen should
show a fixed image of the first channel until the image of the second
channel is available.
10.1.5
Auto-Standby
Press
◄/►
to select whether the smartmeter should automatically be
switched off after three hours of inactivity.
10.1.6
Level Unit
Press
◄/►
to select whether levels are displayed in
dbµV
or
dBm
.
10.1.7
Tuner 5V
Press
◄/►
to select/unselect a voltage of 5V on the aerial port to sup-
ply a connected DVB-T aerial that does not have own power supply.
10.2
Factory Reset
Select in the submenu
Settings
the item
Factory Default
and confirm
with OK.
10.2.1
All
1. Select the menu item
All
to reset the smartmeter
T20 to factory set-
tings.
2. Press OK to confirm your selection. The display shows a warning tell-
ing you that the factory reset will delete all current data and settings.
The prompt asks you to confirm that you want to proceed.