smart-e S4K-8x8, Instruction Manual

Page: 26 / 36

EDID function for HDMI Matrix Switcher
PAGE 26
S4K-8x8
INSTRUCTION & OPERATION MANUAL
EDID SETUP
Press
6.2 Embedded EDID modes
Total (7) EDID Modes
Operation will abort if no keys are pressed within 5 seconds.
EDID setup
Step 1 . Press the EDID button The display will show the currently selected EDID mode
Step 2 . Press SOURCE #1 or #2
button row
The button will flash blue and the display will show
the current
Embedded
EDID Status.
Step 3 . Press the ENTER button
To set EDID mode.
The switcher will return to operation mode.
Select Embedded EDID :
Mode 1 :
FSS
Mode 2 : H24-3D
Mode 3 : H24-3D-M
Mode 4 : H36-3D
Mode 5 : H36-3D-M
Mode 6 : 4K2K
Mode 7 : DVI-D 1920x1200 -60Hz
EDID
>
SOURCE
>
ENTER
Embedded EDID setup
To change the EDID setup
Repeatedly depressing the source 1 button will cycle up thru the options.
Repeatedly depressing the source 2 button will cycle down thru the options.
to select Embedded EDID mode or LEARNING mode .
SOURCE #1
or
SOURCE #2 EDID
2. H24-3D, PCM 2CH
Press EDID button : The LCM will show the current EDID status.
Press
6.1 RESET
EDID Return To Factory default
EDID
>
RECALL
>
ENTER
How to RESET EDID mode
EDID
RESET EDID
Press EDID button : The LCM will show the current EDID status.
Press RECALL button : The LCM will show the RESET EDID.
Press ENTER to confirm entries.
The EDID will return to FSS mode and resolution 1080p-2CH.
RESET To the FACTORY DEFAULT (1080p-2CH).
EDID
1. FAST SPEED START