smart-e S4K-8x8, Instruction Manual

Page: 17 / 36

PAGE 17
S4K-8x8
INSTRUCTION & OPERATION MANUAL
9
FUNCTION KEY - ARC
9
ARC
OUTPUT 1 2 3 4 5 6 7 8
A A A A
FRONT PANEL
FUNCTION KEY - ARC
POWER
S4K-8x8
1 2
SOURCE STATUS
3 4 5 6 7 8
ALL OFF RECALL MEMORY EDID ENTER LOCK
1 2 3 5 6 7 8
SOURCE
DESTINATION
SOURCE
DESTINATION
4
1 2 3 5 6 7 8 4
IR
OUTPUT 1 2 3 4 5 6 7 8
ARC A A A A
8x8 HDMI-HDBASET Matrix Switch with Auxiliary Audio I/O
ARC AUX
Audio Return Channel (ARC) is a feature that sends audio from the TV back down the HDMI (or HDBaseT) cable to its source device,
in this case, the switcher, Not all displays support ARC; check your Users Guide for additional information. ( Default = ARC Disabled )
The “Audio & ARC” port can support audio from either of three sources.
If the Input Video/Audio Source is HDMI/HDBaseT, the audio can extracted from the embedded signal.
If the Input Audio Source is connected to the external Audio Input, this same audio will be present on the Audio & ARC jack.
If ARC is selected, the audio will be from the destination device (ex; TV).
To Enable the ARC option on a specific Output, perform the follow steps:
- Press the
button.
- on the Destination row, Press 1 thru 8 (the button will illuminate).
- Press ENTER button. The new configuration will be stored
The front panel LCD display will now show an “ A “ under the Output port.
- or press
ARC again to cancel operation.
To Disable the ARC option on a specific Output, perform the follow steps:
-Press the
ARC button
-On the Destination row
,
press 1 thru 8 (the button will illuminate).
-Press ENTER The pre-set configuration will execute
.
The front panel LCD display will be blank under the Output port
- or press
ARC again to cancel operation.
Note :
1. Operation will abort if no keys are pressed within 5 seconds.
2. The AUX Audio input only function when a valid HDMI / DVI video signal is present.
Without a video, the AUX audio will not operate.
ARC