SYSTEM RESET function For Matrix Switch System Return to Factory Defaults
PAGE 15
S4K-8x8
INSTRUCTION & OPERATION MANUAL
SYSTEM RESET - FACTORY DEFAULTS
Press
7. SYSTEM RESET
Switch Return To Factory default
OFF
>
RECALL
>
ENTER
How to SYSTEM RESET
SYSTEM RESET
To Press RECALL button :
The LCM will show the current stored presets status.
To Press OFF button :
The LCM will show “ SYSTEM RESET ”.
To Press ENTER to confirm entries.
RESET To the FACTORY DEFAULTS
RECALL
2 2 2 5 5 5 6 6
1 2 3 4 5 6 7 8
S-02
OUTPUT 1 2 3 4 5 6 7 8
SOURCE 1 2 3 4 5 6 7 8
NOTE: factory reset defaults to:
1. Source Destination will be set to 1-1, 2-2, 3-3, etc.
2. Switch matrices stored in memory will be cleared.
3. Lock function will return to un-lock.
4. Aux function will disable and return un-AUX (on select models)
5. ARC function will disable and return SPDIF as output (on select models).
6. EDID will return to FSS® (1080p-2ch mode)
7. Ethernet port will return to DHCP=ENABLED
The switch will reset all customizable values back to factory default.
You must POWER CYCLE the switch for these new values to take effect.
Summary of Contents for S4K-8x8
Page 36: ...w w w smart e co uk...
