4K-KVM USER MANUAL V1.1
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 47
5.4 VIDEO WALL:
A 3X5 (row x column) video wall setting example here for reference. In multicast and matrix
application mode, access the Web user interface of correspondent receiver to setup.
5.4.1 (BASIC SETUP)
Please refer to
“Section
6.2.1 Basic
setup”
and follow the steps as below. Step1: Set up the
vertical monitor count to
“3”
Step 2: Set up the horizontal monitor count to
“5”
Step 3: Set up
the row position of the monitor to 0
Step 4: Set up the column of the monitor to 0
Step 5: Apply the setting to the extender system
The administrator can complete each Extender position setting after following the 5 steps above.
And then follow the above steps to set the other extenders to the rest of row and column positions
from 0x1, 0x2, 0x3 to 3x5
After the basic setup of the video wall, please access the advanced setup to proceed other detailed
setting of the video output.
