SMARTdesks.com
8
800 770 7042
Install the back, then
desktop and shelf
Insert pins into back, desktop and shelf, then
tighten the cams.
For adding on, this unit is now ready for another side panel, installed with
double ended pins, just like the previous step. To finish the group, add the side
panel with single ended pins, just as you would on a stand-alone unit.
Single end pins are used for installing the shelf and desktops
because they do not share the same pin hole locations. Note
that the top shelf is not used at standing height.
Single end pins are used for installing the shelf and desktops
because they do not share the same pin hole locations. Note
that the top shelf is not used at standing height.
