Install second end panel
Install 3 single end
pins into back panel
and tighten cams.
Install desktop
Three sets of holes are provided for desktop heights.
This is the lowest height: 28 inches from floor. Use
this when a computer keyboard or laptop is used on
the desktop or with a flipIT Laptop Safe®.
Use this set of holes to install the desktop 30” from
the floor. Use this when a keyboard tray will support
a keyboard at about 28” above the floor. The flipIT™
K19 is installed at this height, or a solid desktop
with KB26 keyboard tray when monitor will sit on
desktop.
Use this set of holes for 36” standing height. Stand-
ing height is compatible with flipIT® K19, L18 Laptop
Safe, or solid top.
Note: After assembly of unit, use 1/2” pin hole
covers
for a ne
at
installation.
1/2” diameter pin hole
covers
SMARTdesks.com
5
800 770 7042
