Assembly Approach
To assemble the stand-alone single-sided unit, start
with the back on the floor, cams face up. The floor
surface should be carpeted or furniture blankets
should be used to protect the furniture surfaces
from getting scratched.
If you are assembling many add-ons,
assemble the first two on their backs, then place
them upright and proceed with the rest of the add-
ons in their finished location.
IMPORTANT:
Avoid moving the full add-on assembly as a unit.
To do so requires many hands to lift together. Plan
ahead to assemble units of 4 or more in their
finished, installed location.
Place side panel in line with pin holes and
insert single end pins in the finish side (stand-
alone unit), or double end pins if add-on
units are to be assembled in-line.
This example shows the stand-alone version, so single end pins are used on
both sides.
Use a Phillips driver, #2 bit, and turn the cam to
secure the pin. The arrow of the cam should point in
the direction of the hole for insertion and clockwise
away from the hole to tighten.
SMARTdesks.com
4
800 770 7042
