SMART Board X800ix, User Manual

Page: 26 / 96

Setting Use Notes
Auto Power Off
(minutes) Sets the length of the auto power-off
countdown timer between 1 and 240
minutes. The timer begins to count down when
the projector no longer receives a video
signal. The timer finishes when the
projector enters Standby mode.
Select 0 to turn off the timer.
Zoom Adjusts the zoom to the center of the
image in or out from 0 to 30. This setting affects image adjustments
done mechanically to the boom.
Projector ID Displays the projector’s unique ID
number (from 0 to 99) within your
organization’s network.
Aspect Ratio Adjusts the image output to Fill
Screen , Match Input or 16:9 .
Fill Screen produces an image that
fills the entire screen with stretching
and scaling.
Match Input matches the projector’s
aspect ratio to the input’s aspect ratio.
As a result, black bands might appear
along the top and bottom edge of the
screen horizontally (letterbox format) or
along the left and right edge of the
screen vertically (pillarbox format).
16:9 changes the output to 16:10 by
letterboxing the image, which is
recommended for use with HDTV and
DVD/Blu-ray discs enhanced for wide-
screen television.
See Video format compatibility on page
27 for appearance descriptions in each
mode.
Startup Screen Selects the type of startup screen
(
SMART , Capture User Startup
Screen or Preview Startup Screen ).
This screen displays when the
projector lamp is starting and an image
isn’t displayed.
SMART displays the default SMART
logo on a blue background.
Capture User Startup Screen closes
the on-screen display menu and
captures the entire projected
interactive whiteboard image. The
captured image is displayed the next
time that the on-screen display opens.
(The capture can take up to one
minute, depending on the complexity of
the background graphic.)
Preview Startup Screen enables you
to preview the default or captured
startup screen.
C H A P T E R 3
Using your interactive whiteboard system
16