SMART Board Board 800ix2, Configuration And User'S Manual

Page: 82 / 100

A P P E N D I X C
Adjusting projector settings
72 smarttech.com/kb/170453
Setting Use Notes
Projector Name Displays the projector’s name
as set by an administrator
(maximum 12 characters). You can set the projector’s name using the
remote management features (see
Remotely
managing your system through a network
interface
on page 41 and Remotely managing
your system through an RS-232 serial
interface
on page 51).
Location Displays the projector’s location
as set by an administrator
(maximum 16 characters). You can set the projector’s location using the
remote management features (see
Remotely
managing your system through a network
interface
on page 41 and Remotely managing
your system through an RS-232 serial
interface
on page 51).
Contact Displays the contact name or
number for projector support as
set by an administrator
(maximum 16 characters). You can set the contact name or number using
the remote management features (see
Remotely managing your system through a
network interface
on page 41 and Remotely
managing your system through an RS-232
serial interface
on page 51).
Language menu
Language Selects language preference. Projector menu support is available in English
(default), Chinese (Simplified), Chinese
(Traditional), Czech, Danish, Dutch, Finnish,
French, German, Greek, Italian, Japanese,
Korean, Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal), Russian,
Spanish and Swedish.
Information menu
Lamp Hours Displays the current number of
lamp usage hours from when it
was last reset. Always reset the lamp hours after you replace
a lamp, because lamp service reminders are
based on the current hours of use. See
Resetting the lamp hours on page 23 for
details on the lamp hours reset procedure.
Input Displays the currently displayed
video input source (
VGA ,
HDMI1 , HDMI2 or None ).
Resolution Displays the projector’s most
recently detected video source
signal resolution and refresh
rate. If there is no current video input source signal,
this setting displays the last known source
signal image resolution and refresh rate.