A P P E N D I X A
Remotely managing your system through a network interface
44
smarttech.com/kb/170453
Submenu setting
Description
White Peaking
Adjusts the image color brightness from 0 to 10 while providing more
vibrant white shades. A value closer to 0 creates a natural image and
a value closer to 10 enhances brightness.
Degamma
Adjusts the color performance of the display from 0 to 3.
Color
Adjusts the Red, Green, Blue, Cyan, Magenta and Yellow colors on
the projector from 0 to 100 to provide custom color and luminance
output. Each color has a default value of 100. Adjustments to the
color settings register to the User mode.
Auto Signal Detect
Enables or disables signal searching of input connectors.
l
Select
On
to have the projector continuously switch inputs until
it finds an active video source.
l
Select
Off
to maintain signal detection in one input.
Lamp Reminder
Select
On
to show or
Off
to hide the lamp replacement reminder when
it appears. This reminder appears 100 hours before the recommended
lamp replacement.
Lamp Mode
Adjusts lamp brightness to
Standard
or
Economy
.
Standard
displays a high-quality, bright image.
Economy
increases the lamp
life by decreasing the brightness of the image.
Auto Power Off
Sets the length of the auto power off countdown timer between 1 and
240 minutes. The timer begins to count down when the projector no
longer receives a video signal. The timer finishes when the projector
enters Standby mode. Select
0
to turn off the timer.
Zoom
Adjusts the zoom to the center of the image in or out from
0 to 30.
H-position (RGB input)
Moves the horizontal position of the source video left or right from 0 to
100 (relative to the projected image).
N O T E
This is useful in situations where the source video is cut off.
V-position (RGB input)
Moves the vertical position of the source video up or down from -5 to
5 (relative to the projected image).
N O T E
This is useful in situations where the source video is cut off.
