A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
61
smarttech.com/kb/170453
Usable command by
power state
Property
Valid values
Notes
Standby /
idle
On
get
resolution
last known video input
resolution in the format of
###x###@##Hz or ###i/p
set or get
highspeedfan
• high
• normal (default)
Enables the high speed fan
in hot environments to
prevent overheating.
get
get
failurelog
Returns a text list of
failures detected by the
projector and logged in
the projector's failure log
(or an indication of
“normal”). This is in the
format of failure1, failure2,
failure3, etc.
Failures detectable by the
projector include the
following: overtemp, fanlock,
fanDMD, fanblower,
fansystem, lamperror,
colorwheelbreak, lampignite,
lampoverheat, lampdriver,
lampoverhours
get
gett
error#
Returns text information
about the specified error
number in the projector’s
error log.
Reported data: Error type,
lamp hours, system hours,
system temperature, and
lamp voltage when the error
was detected.
set
set
restoredefaults
This immediately reset the
projector operating
parameters to their factory
default settings. A hard
power-cycle may be required
to complete.
set
set
factoryreset
• true
• false
Setting this to “true” resets
the projector operating
parameters to their factory
default settings. A hard
power-cycle may be required
to complete.
