Appendix D
Managing SMART Board 6000S (C) or 6000S series displays using RS-232
97
Firmware version commands
Get command
Response
If one display is connected
get fwversion
fwversion=[Value]
Where
[Value]
is the firmware version.
If multiple displays are connected
[Display],@ get fwversion
Where
[Display]
is the display’s label (
A
,
B
, and so on).
@,[Display] fwverversion=[Value]
Where
l
[Display]
is the display’s label (
A
,
B
, and so on).
l
[Value]
is the firmware version.
Serial number commands
Get command
Response
get serialnum
serialnum=[Value]
Where
[Value]
is the serial number.
NOTE
If multiple displays are connected, the response includes the
serial numbers for all displays separated by commas.
Part number commands
Get command
Response
get partnum
partnum=[Value]
Where
[Value]
is the part number, including the revision.
NOTE
If multiple displays are connected, the response includes the
part numbers for all displays separated by commas.
