SMAR DT302, Owner'S Operation And Maintenance Manual

Page: 57 / 84

Configuration
3.23
Figure 3.19 - Step 2 - DT302
Figure 3.20 - Step 3 - DT302
Figure 3.21 - Step 4 - DT302
Insert the
magnetic tool
in orifice S and
once more
LOC ADJ
should be
displayed.
Remove the
magnetic tool
from orifice S.
In this option the
first variable
(P_VAL) is
showed with its
respective value.
If it is wanted it to
be static, place
the tool in S and
keep it there.
Place the magnetic tool in
orifice Z. If this is the first
configuration, the option
shown on the display is the
TAG with its corresponding
mnemonic configured by
the SYSCON. Otherwise,
the option shown on the
display will be the one
configured in the prior
operation. By keeping the
tool inserted in this orifice,
the local adjustment menu
will rotate.
In order to decrement
the lower value, place
the magnetic tool in
orifice Z to shift the
arrow to the downward
position and then, by
inserting and keeping
the tool in orifice S, it
is possible to
decrement the lower
value.
In order to calibrate the
lower value (LOWER),
insert the magnetic tool
in orifice S as soon as
LOWER is shown in the
display. An arrow
pointing upward (

)
increments the value
and an arrow pointing
downward (

)
decrements the value. In
order to increment the
value, keep the tool
inserted in S until the
desired value is set.