Smappee EV Base
–
Installation manual - English
25
Swipe and charge
Charging sessions can be started using an RFID card. You can either use a Smappee Smart Charge
Card for free charging or (if activated) a third party eMSP card to pay for charging sessions.
The RFID reader is situated at the top of the EV Base.
•
Whitelist:
charging is free with a Smappee Smart Charge Card or any other authorized RFID
card. Once the charging cable is plugged-in, the user simply swipes their RFID card and the
free charging session begins. All authorized cards must first be added to the whitelist using
the 'Whitelisting' card on dashboard.smappee.net. See
Cards can be ordered via
.
•
Public charging:
other EV drivers can use this charging station an pay with a payment card
from a third-party eMSP such as Shell Recharge or Plugsurfing . This can be done through
Smappee's own CSMS or through a third-party CSMS. In case you would like to use the
Smappee CSMS, please contact
to activate this.
•
Split Billing:
This is aimed at employees who charge their company car at home and need to
be reimbursed for the electricity consumption. Split billing agreements must be made for
each employee. Starting a charging session is similar to whitelisting but at the end of each
month, Smappee Services will send a bill for all employees' charging sessions to the
company. All individual employees will be reimbursed according to the amount of kWh
charged. See
Start charging
Stop charging
