Smailo HD 4.3, User Manual

Page: 24 / 174

5
INSTALLATION
The following guides you step by step through the initial set up of the
navigation system.
Firstly, remove the foil for protecting the device during transportation from the
display.
How to access the Navigation System
Press Sleep/Wake up button for about 4-5 seconds to wake up the unit (Note:
Sometimes the unit will not be woken up by reason of low battery, please
charge the battery. When charging, the indicator is red). The brand logo will
appear and your device will display the application screen after a few seconds.
Attention: According to the charging status of the accumulator installed, it is
necessary for the device to be charged before the initial setting up can run
through.
Charging Battery of the Navigation System
In causing of charging, the Battery Charge Indicator is red.
You have different possibilities to charge the battery of your navigation system:
●
With the help of a network adapter (not included in the original package)
●
By means of the car adapter.
The battery charge indicator lights red until the navigation system is charged.
Do not interrupt the charging process before the battery is fully charged. It will
take a few hours for the navigation system to be fully charged. When the
battery is fully charged, the battery indicator will turn to green.
●
Note: You can use the navigation system during the charging process.
Working with memory cards
Your navigation system supports microSD cards.
Inserting memory cards
1. Carefully take the memory card out of its packing (if included). Take care
not to touch or dirty the contacts.
2. Push the memory card carefully into the card bay. The side of the memory
card wearing the label must point upwards. (The display is oriented toward
the user). The memory card should slightly lock in place.
WARNING
We recommend using a dedicated microSD card. If the cards have been
previously used in other devices (phones, cameras, other GPS
navigation systems), make sure you format the card first.
Removing memory cards
●
Do not remove the memory card while it is accessed. This could result in
loss of data.
1. To remove the card press lightly onto the upper edge until it ejects.
2.
Pull the card out without touching the contacts.
3.
Store the memory card in the packing or in another safe location.
●
Memory cards are very fragile. Take care not to dirty the contacts and not to