16 |
1) Connect your USB-3200 card to the computer and launch the Device Manager in
Windows.
2) There should be a device with an exclamation point.”
Right-click it, select “Update driver”.
3) In the pop-up dialog box, select “Browse my computer for driver software”
4) And then select “Let me pick from a list of device drivers on my computer”
5) Click on “Next” and then select “Have disk”
6) Click Browse in the pop-up dialog box, then enter the \USB-3000SeriesDAQ\driver
folder in the CD-ROM, then enter the "win7" folder, then the 32-bit operating system
enters the "x86" folder, the 64-bit operating system enters the "x64" folder, select the
"susb.inf" file, and then click "Open". (The drivers of Windows8/8.1 and Windows10
are the same as those of Windows7, using the same file. )
7) Then in the dialogue of “Install from disk”, click on “Yes”.
8) Click “Next”, if the Windows security warning pops up, you need to select “Install this
driver software anyway” to finish the installation.
After these steps, the operating system will start installing the driver, which usually takes about 30
seconds. After the driver is installed, the exclamation point in Device Manager will disappear, as
shown in the following Figure 2.3.