SMA Windy Boy WB 1100LV User Manual Download Page 60

Page: 60 / 78

General Information

SMA

Technologie AG

Page 60

WB1100LV-11:FE2606

User Manual

Uac-Tavg

Averaging time for measuring grid frequency.

UdcWindMax

Defines the voltage at the moment when the Windy Boy begins
feeding maximum power into the grid.

UdcWindMid

Defines the voltage threshold, after which the curve climbs more
steeply.

UdcWindStart

Defines the voltage at the moment when the Windy Boy begins
to feed power into the mains grid, and begins to extract power
from the turbine.

Upv-Start

Defines the voltage at the moment when the Windy Boy is ready
to perform grid synchronization.

Usoll-Konst

Target DC voltage for constant operational voltage. These
parameters are only important when the "Betriebsart" parameter
is set to U-konst.

Name

Explanation

Summary of Contents for Windy Boy WB 1100LV















































































Search results

Summary of Contents for Windy Boy WB 1100LV

Reviews:

Related manuals for Windy Boy WB 1100LV

Brands by name

Popular brands

SMA Windy Boy WB 1100LV, User Manual

Search results

Summary of Contents for Windy Boy WB 1100LV

Reviews:

Related manuals for Windy Boy WB 1100LV

Brands by name

Popular brands