SMA SUNNY ISLAND SIC40-MPT, Technical Description

Page: 30 / 52

Electrical Connection SMA Solar Technology AG
30 SIC40-TEN081110 Technical Description
Connection Procedure
1. Remove the resistor.
2. Unscrew the M25 metric-thread cable screw connection's lock nut (A) and slide it over the
battery temperature sensor cable.
3. Remove the seal insert along with the cable gland from the cable screw connection.
4. Route the cables through the cable openings in the seal insert.
5. Connect the battery temperature sensor cables to the connection terminal (B).
6. Tighten the lock nut of the cable screw connection.
A B