manualshive.com logo in svg

SMA Sunny Island 2012, Technical Description

Share
Download
SMA Sunny Island 2012 Technical Description Download Page 114

Operating the Sunny Island 

SMA

 Solar Technology AG

114

SI2012_2224-TEN082311

Technical Description

10.4.6 Updating Firmware

The firmware of the Sunny Island can be updated using the MMC/SD card. When the Sunny Island 
starts up or when the MMC/SD card is recognized, the Sunny Island searches for special update 
files on the MMC/SD card. If it detects such update files it conducts an update when it is on standby.

Meaning

Display

The memory capacity of your MMC/SD is full.

The MMC/SD card has an invalid file format.

The MMC/SD card is incompatible.

Clearing Errors

For help on troubleshooting see section 18.8 "Troubleshooting" (Page 192).

New MMC/SD card

Always save the latest firmware version on the MMC/SD card first. Upon delivery this 
card is still empty (unwritten). 

 312#07

 CardStt

 Out Of Space

 312#07

 CardStt

 Bad File Sys

 312#07

 CardStt

 Incomp

Summary of Contents for Sunny Island 2012





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands