SMA SUNNY BOY 5.5-JP Operating Manual Download Page 88

Page: 88 / 94

13 Decommissioning the Inverter

SMA Solar Technology AG

Operating manual

SB55-LV-JP-41-BE-en-13

12. Unscrew the left- and right-hand pan head screws

M5x12 used to secure the inverter to the wall
mounting bracket (PH2).

13. Remove the inverter by lifting it vertically up and off

the wall mounting bracket.

14. Unscrew the screws for fastening the wall mounting

bracket and remove the wall mounting bracket.

15. If the inverter is to be stored or shipped, pack the inverter, the AC connector, the DC

connector, the RJ45 protective sleeve, the antenna and the wall mounting bracket. Use the
original packaging or packaging that is suitable for the weight and dimensions of the inverter.

16. Dispose of the inverter in accordance with the locally applicable disposal regulations for

electronic waste.

Summary of Contents for SUNNY BOY 5.5-JP































































































Search results

Summary of Contents for SUNNY BOY 5.5-JP

Reviews:

Related manuals for SUNNY BOY 5.5-JP

Brands by name

Popular brands

SMA SUNNY BOY 5.5-JP, Operating Manual

Search results

Summary of Contents for SUNNY BOY 5.5-JP

Reviews:

Related manuals for SUNNY BOY 5.5-JP

Brands by name

Popular brands